How To Create Ha Tunnel Plus Files For Free Internet Access

Pappi Hex
41

The Ha Tunnel Plus VPN is a good VPN tunnel app to access free Internet with unlimited data. But then, your Ha Tunnel Plus VPN app will be of no good to you when you don't know how to create Ha Tunnel Plus files or cook up Ha Tunnel Plus config settings.

I've created several Ha Tunnel Plus free Internet settings in the past and know how confusing it can be when you try to create a working Ha Tunnel file for the first time. But don't worry for in this article, i will break down every step needed to guide you on how to create working Ha Tunnel configuration files using working free Internet hosts.

Table of Contents 

What is free Internet?

Free Internet refers to the Internet that you can get without spending a dime for it. It could be in the form of free Wifi, free data, or maybe, Internet that you got using a VPN tunneling software to trick and bypass your ISP's firewall.

I know some people don't really believe that the Internet can be gotten for free using some circumvention tools. But then, it's very much true and we will put you through every process in this article. 

How to get Ha Tunnel Plus VPN free Internet

Ha Tunnel? Sounds more like you laughing (ha ha ha ha) when tunneling for free Internet access, so hence the name Ha Tunnel (LOL). Don't mind me,  I don't know how the name came about.

As this post goes deep, you might want to check out this link that explains some terms used in this post for easy understanding. I wouldn't want you to skip any part of this post unless you've read it before.

When it comes to the Ha Tunnel Plus VPN, there are several ways to configure the VPN tunnel app to get free unlimited Internet. It doesn't matter whether you are on MTN, Safaricom, Ooredoo, CellC, Vodacom, Glo, Digicel, Mytel, Telenor, or whatever your network is called. All that is needed is a little understanding of your network to get free Internet access (though, they are some networks that need more time because they are cumbersome even to understand)

Also, you will need working hosts for free Internet access in this post. A working host is very important here because 90% of free Internet tricks depend on hosts to enable them to bypass your ISP service provider firewall. These hosts could be in the form of packet host, CDN host, or SNI host.

Okay, Okay, I hear you complaining that you don't know "how to find Ha Tunnel hosts" for this whole setup. Again, I've got you covered. I wrote three articles that use different methods to get you working hosts on your network.

The first article uses a technique that works like an SNI host finder or hostname finder to get you a working host on your network for free. They've always been there but just hidden. The second article will show you how to comb free CDN hosts on your network which in turn will give you unlimited Internet connection. 

However, the third article won't go digging into your network for free SNI hostnames. Instead, it will bring out a free SNI host list currently in use by people from your country for free Internet access. I don't know what you want, but I will advise you to go through three of the articles if you really want to find some good Ha Tunnel hosts. Imagine that feeling when you finally get to create your own Ha Tunnel Plus free Internet configuration files and not depend on anyone for it. 

Ha Tunnel Plus config file download

Before we proceed with "how to create Ha Tunnel Plus files", those interested in already made "hat files for Ha Tunnel" can get their own country's configuration in our list of working Ha Tunnel Plus config file downloads

The configuration files in this are constantly updated by our team. But then, this should come after you've read the main post and know "how to use ha Tunnel Plus for free Internet". 

Now that you've known how to get Ha Tunnel Plus free Internet and as well free Ha Tunnel host, we will head over to the step.

Note: Kindly leave your say in the comment section if you have any questions or thoughts in regards to today's post. 

Requirements on to create Ha Tunnel Plus hat file:

  • Ha Tunnel Plus latest version: The latest version of Ha Tunnel Plus VPN app (Click here to download)
  • SIM card: Any SIM card of your choice with zero data and airtime (for those who will be trying theirs out as the tutorial progresses)
  • Host/SNI: A working host/SNI or the one that you want to test. You can get them here.
  • Patience: Yes, patience. Creating a free net trick can be easy and fun, but sometimes it can be frustrating. So yes, you need patience.

How to create a Ha Tunnel Plus file

This is where the real tutorial begins. All that we've been talking about is to prepare you on how to create a working free internet configuration settings. Again, all the methods in this post can be used on any ISP's network in the world, including yours.

We will treat all the methods that Ha Tunnel offers for free Internet access. Before then, you need a few things before we begin to cook up the settings.

1. Direct Connection method:

This method doesn't require you to do anything special because the steps are very much simple. Read on.

When to use: This method comes in handy when your network has an open port on its server, or you want to use a social media pack, or a similar subscription to access free internet on your device. But then, this method doesn't always work, which is what makes it appear first.

  • Open your Ha Tunnel Plus app
  • Go to Connection Mode and enable Custom Setup
  • Click on the drop-down arrow icon and select Direct Connection (Internet)
  • Go up right and click on Select Port, and then select your port from the drop-down (The most common ports used in this case are 80,443, 3128, and 8080)
  • After then, go to Select Server and select the server of your choice. If not leave the default server that way.
  • Click on Start and wait for your connection to go through. You can check the Log section for your connection status

2. Custom Payload (TCP Mode):

his is where things begin to get interesting. This connection method uses TCP (Transmission Control Protocol) for users to access free Internet access. Though not stated, this uses the HTTP method.

When to use: This can be used for tricks that offer free unlimited access without paying for it, and as well as social media packs, eLearning bundles, and similar stuff. I will make use of this Sierra Leone host moh.gov.sl on the Orange network

  • Open your Ha Tunnel Plus app
  • Go to Connection Mode and enable Custom Setup
  • Click on the drop-down arrow icon and select Custom Payload (TCP Mode)
  • Locate the hamburger button at the top upper left corner of your screen and click on it. 
  • Click on Payload Generator and you will see exactly what is in the screenshot below

Here is a brief description of what some of these methods mean:
  • Host: Here you put in your free host/SNI. It could the host of even the subscription that you want to use and circumvent your ISP restriction for free Internet access.
  • Method: This is your method of injection (HTTP requests) to trick your ISP. There is a drop-down for you to select the one that best suits you.

  • HTTP-Bug: Is your host an HTTP bug? Yes, most likely it is. For that, this should be your preferred choice when creating configuration since it does the work of the GET. This method is specific and forces your connection through.
  • GET: This method should be the second thing you tick when the HTTP-Bug method fails. GET does the job too very well. The GET method pulls data from the web server that you are posting it to.
  • CONNECT: Not really popular though, this method is used to create an HTTP tunnel via a proxy server. This method is mostly used for SSL connections, but it also works for HTTP as well.
  • HTTP Version: I won't start explaining everything from scratch because we might end up diverting from the topic of today. There are three versions of HTTP here:

  • HTTP/1.0: This guy is old and is heading into retirement already. No need to use it unless you are very sure of what you are doing.
  • HTTP/1.1: This guy is the most common version of HTTP in use today. To avoid issues, this should be your preferred destination.
  • HTTP/2: Unlike HTTP/1.1, this guy is better and faster. It comes with improved performance, reduced latency, etc, but hasn't seen wide adoption as the former.
  • HTTP HEADERS: This section enables the communication or transfer of data between a web server and a client with an HTTP request or response. 

  • Keep Alive: This general-type header allows the sender to set the maximum amount of requests or how long a persistent connection should stay open. You need this option for your connection.
  • User-Agent: This request header is like a middle guy that retrieves, renders and as well, facilitates end-user interaction with the web content. Long story short, you need it for free Internet surfing.
  • Online Host: let's not complicate things. This is the webserver and you definitely need it.
  • Forwarded For: This enables this app to obtain endpoint information. Enable this only when necessary......by necessary I mean when the main option doesn't work for you.

Please I won't be able to discuss CloseReferrer, and Forward Host. I'm already trying my best to beat down this write-up. 

So this is what I came out with from the Sierra Leone Orange free host (moh.gov.sl). Once you are done, click on Generate. 

After clicking on Generate, you will be taken to another page where you will have to confirm the details. If it's okay, click on Apply to apply the settings Ha Tunnel Plus.

Click on Connect and then wait for the connection to go through. You can also check the log section for your connection status.

3. Custom Host Header (HTTP Mode): 

First of all, I don't use this because (I believe) it doesn't really do that much. HTTP Mode is written there but you don't see anything other than the name and a Custom Host/Payload. The makers of this app should have also given this guy a payload generator just as they did with the TCP. 

If the connection protocol must be HTTP and not TCP or SSL, I will suggest you connect through an HTTP Proxy if that will do. If not, take a walk. 

Anyway, you can put in your Custom Host and then select the port it will run on in the Select Port section. Also, check the log section too for the status of your connection

4. Custom SNI (SSL/TLS Mode):

The SNI (Server Name Indication) is another method to use for free Internet access on the Ha Tunnel Plus app. This method overnight became very popular since tricks on it lasts longer. Tricks tunneled via HTTP, TCP, UDP, etc. do easily get blocked when shared with many users. This is because your ISP knows much about the above methods.

However, SNI not until recently wasn't used much. The method is still new to them and your region might not even support it (for now) which should be good news to you.

When to use: This method can be used for all kinds of tricks. This includes tricks that offer free unlimited access without you paying for it, and as well as social media packs, eLearning bundles, free hosts, etc. I will make use of cdc.gov for Telikom Papua New Guinea, and 45.33.4.164 for MTN Ghana.

For those who need urgent SNI, (in whispers) there is a way in which you can get free SNI/hosts without much stress. Take a few minutes of your time and check it out.

  • Open your Ha Tunnel Plus app
  • Go to Connection Mode and enable Custom Setup
  • Click on the drop-down arrow icon and select Custom SNI (SSL, TLS Mode)
  • You can now type in your SNI in the Custom SNI space provided, tick Use Realm Host (v2), and then Start.
  • Or this

Note: The above host used is the one I said I was going to use. You are to make use of your own and not the ones I used above. If you encounter an issue while trying to establish a connection while using SNI, try adding www. to your host or take it off if it was there in the first place.

For example, let's say we tried using www.cdc.org but it didn't work, we will try using cdc.org instead without the www. The same applies when you try using cdc.org and encounter an issue, you simply add www to it. This minor error can stop your connection from going through.

How to export Ha Tunnel Plus .hat file

You must have done your settings and confirmed the configuration is working

  • Click on the hamburger icon and then Export Config 
  • You will see the below when you click on Export Config

    • Filename: You name the file name here
    • Add Description/Message: This is where you talk about the .hat configuration file
    • Anti-Sniff: This prevents the config from being sniffed
    • Mobile Data: When you tick this option, only those on the mobile network will be able to use the configuration. It won't work for WiFi users.
    • Block Root: This will block Android users on a rooted device
    • Password: When you enable this, users will need a password from you to use the configuration fileSet Expiry: This is used to step an expiry date for the configuration to expire.

    • Now click on Export and the configuration will be exported to Ha Tunnel Plus folder on your phone.

    How to import Ha Tunnel Plus .hat file

    • Click on the hamburger icon and then Import Config 

    • Now locate the config that you want to import and then click on it.
    • When it finally uploads, click on Start and then wait for the connection to go through.
    • Round up:

      Use the procedures shown in this post, and a swell feel free to experiment with other methods to better yourself in creating free Internet tricks. If you have questions regarding this post, kindly hit us up in the comment section.

      I will also be discussing new methods that aren't known to you guys yet to use and get free internet access. Meanwhile, there are some unfinished parts in the Ha Tunnel Plus post that I will complete in another post. These are:

      • How to get extra time on Ha Tunnel Plus tunneling app
      • How to speed up Ha Tunnel Plus Internet connection and avoid common errors

      Post a Comment

      41Comments
      * Please Don't Spam Here. All the Comments are Reviewed by Admin.
      1. Wow
        Great..
        Love this bro..
        All this method works for me.
        Please try to check your telegram inbox

        ReplyDelete
      2. Replies
        1. Response from your region is not much whenever i have stuffz to test...that the reason why we pulled the plug

          Delete
      3. Man this article is amazing! You broke down the application intuitively, I couldn't be more happier that I stumbled upon this site.

        ReplyDelete
        Replies
        1. I'm glad you love it. Kindly share the article with your folks.

          Delete
      4. I don't have a telegram channel yet I have the ha tunnel plus VPN send me configuration files on my watsap +256707845838

        ReplyDelete
      5. Telkom and Vodcom RSA configs pls

        ReplyDelete
      6. Can u please send me the configuration files too on WhatsApp +256705084069

        ReplyDelete
      7. I need configuration files please

        ReplyDelete
      8. Connect ha tunnel vpn unlimited mtn only

        ReplyDelete
      9. Can you please help me with Yemen hatunnel configuration file , for mobile networks both CDMA and GSM .

        ISP only one named Yemen net

        Please send it to me via email

        [email protected]

        ReplyDelete
      10. We need help, ports blocked in Uganda

        ReplyDelete
      11. Am thankful...do u have working HA tunnel files... please send me on my watsap 0758392382

        ReplyDelete
      12. Help me with working KENYAN configuration send me through +254717306478

        ReplyDelete
      13. Can you please send me the file for ha tunnel VPN app on this WhatsApp number. 0783904761 i need for MTN

        ReplyDelete
      14. Hi...
        I need help...
        I need a configuration file for my ha tunnel vpn. Kindly inbox it on my watts app me on +256785130204.
        Thanks

        ReplyDelete
      15. Send me configuration file 923022880596

        ReplyDelete
      16. Please inbox the working Kenyan configuration 0759797998

        ReplyDelete
      17. I need file zong pk network

        ReplyDelete
      18. Need Pakistan network zong file

        ReplyDelete
      19. Need host for lesotho,tips anyone...or at least how to find one

        ReplyDelete
      20. Need hat file for trinidad and tobago please.

        ReplyDelete
      21. How to create a hat file for trinidad

        ReplyDelete
      22. I want also Rwanda configuration file
        WhatsApp :+250785511750

        ReplyDelete
      23. The Kenya configuration is not available yet

        ReplyDelete
      24. Wow!
        I like it
        Please help me
        I want RWANDA configuration file
        Whatsapp:+250780718657

        ReplyDelete
      25. This article discusses some essential technical concepts associated with a VPN. A Virtual Private Network (VPN) integrates remote employees, company offices, and business partners using the Internet and secures encrypted tunnels between locations. An Access VPN is used to connect remote users to the enterprise network. The remote workstation or laptop will use an access circuit such as Cable, DSL or Wireless to connect to a local Internet Service Provider (ISP). dark web links

        ReplyDelete
      26. May u give configuration file of Rwanda
        Please!
        My WhatsApp: +250784546023

        ReplyDelete
      27. Hello thanks sir, i dont want working file,may you help me to find working host that i can make my own kenyan files

        ReplyDelete
      28. Guys what about Rwandan configulation

        ReplyDelete
      29. Kindly please help me i live in Rwanda .who help me to give working host in Rwanda . My gemail is :[email protected]

        ReplyDelete
      30. You send me a configuration used here in Rwanda

        Faithful

        ReplyDelete
      Post a Comment

      #buttons=(Accept !) #days=(20)

      Our website uses cookies to enhance your experience. Learn More
      Accept !
      To Top